行业标准规范英汉对照-通用零部件1

1 GB/T 2-1985 紧固件 外螺纹零件的末端 Fasteners--Ends of parts with external thread
2 GB/T 8-1988 方头螺栓 C级 Square head bolts--Product grade C
3 GB/T 10-1988 沉头方颈螺栓 Flat countersunk square neck bolts
4 GB/T 11-1988 沉头带榫螺栓 Flat countersunk nib bolts
5 GB/T 12-1988 半圆头方颈螺栓 Cup head square neck bolts
6 GB/T 13-1988 半圆头带榫螺栓 Cup head nib bolts
7 GB/T 15-1988 大半圆头带榫螺栓 Cup head nib bolts with large head
8 GB/T 22-1976 小六角头导颈螺栓 Bolts, small hexagon head with fit neck
9 GB/T 23-1976 小六角头螺杆带孔螺栓 Bolts, small hexagon head with hole through the shank
10 GB/T 24-1976 小六角头螺杆带孔导颈螺栓 Bolts, small hexagon head with fit neck and hole through the shank
11 GB/T 25-1976 小六角头头部带孔螺栓 Bolts, small hexagon head with holes through the head
12 GB/T 26-1976 小六角头头部带孔导颈螺栓 Bolts, small hexagon head with fit neck and holes through the head
13 GB/T 27-1988 六角头铰制孔用螺栓 A和B级 Hexagon fit bolts--Product grade A and B
14 GB/T 28-1988 六角头螺杆带孔铰制孔用螺栓 A和B级 Hexagon fit bolts with Split pin hole on shank--Product grade A and B
15 GB/T 29.1-1988 六角头头部带槽螺栓 A和B级 Hexagon bolts with slot on head--Product grade A and B
16 GB/T 29.2-1988 十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation
17 GB/T 31.1-1988 六角头螺杆带孔螺栓 A和B级 Hexagon bolts with split pin hole on shank--Product grade A and B
18 GB/T 31.2-1988 六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
19 GB/T 31.3-1988 六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B
20 GB/T 32.1-1988 六角头头部带孔螺栓 A和B级 Hexagon bolts with wire holes on head--Product grade A and B 21 GB/T 32.2-1988 六角头头部带孔螺栓 细杆 B级 Hexagon bolts with wire holes on head--Reduced shank--Product grade B
22 GB/T 32.3-1988 六角头头部带孔螺栓 细牙 A和B级 Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B
23 GB/T 35-1988 小方头螺栓 B级 Square head bolts with small head--Product grade B
24 GB/T 37-1988 T型槽用螺栓 Bolts for T-Slot
25 GB/T 38-1976 螺栓 技术条件 Bolts--Technical requirements
26 GB/T 39-1988 方螺母 C级 Square nuts--Product grade C
27 GB/T 41-1986 1 型六角螺母 C 级 Hexagon nuts--Style 1--Product grad C
28 GB/T 56-1988 六角厚螺母 Hexagon thick nuts
29 GB/T 61-1976 螺母 技术条件 Nuts--Technical requirements
30 GB/T 62-1988 蝶形螺母 Wing nuts
31 GB/T 63-1988 环形螺母 Lifting nuts
32 GB/T 65-1985 开槽圆柱头螺钉 Slotted cheese head screws
33 GB/T 67-1985 开槽盘头螺钉 Slotted pan head screws
34 GB/T 68-1985 开槽沉头螺钉 Slotted countersunk head screws
35 GB/T 69-1985 开槽半沉头螺钉 Slotted raised countersunk head screws
36 GB/T 70-1985 内六角圆柱头螺钉 Hexagon socket cap head screws
37 GB/T 71-1985 开槽锥端紧定螺钉 Slotted set screws with cone point
38 GB/T 72-1988 开槽锥端定位螺钉 Slotted set screws with cone point
39 GB/T 73-1985 开槽平端紧定螺钉 Slotted set screws with flat point
40 GB/T 74-1985 开槽凹端紧定螺钉 Slotted set screws with cup point
41 GB/T 75-1985 开槽长圆柱端紧定螺钉 Slotted set screws withlong dog point
42 GB/T 77-1985 内六角平端紧定螺钉 Hexagon socket set screws with flat point
43 GB/T 78-1985 内六角锥端紧定螺钉 Hexagon socket set screws with cone point
44 GB/T 79-1985 内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point
45 GB/T 80-1985 内六角凹端紧定螺钉 Hexagon socket set screws with cup point
46 GB/T 83-1988 方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end
47 GB/T 84-1988 方头凹端紧定螺钉 Square set screws with cup point
48 GB/T 85-1988 方头长圆柱端紧定螺钉 Square set screws with long dog point
49 GB/T 86-1988 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end
50 GB/T 89-1976 螺钉 技术条件 Screws--Technical requirements

51 GB/T 90-1985 紧固件验收检查、标志与包装 Acceptance inspection,marking and packaging of fasteners
52 GB/T 91-1986 开口销 Split pins
53 GB/T 93-1987 标准型弹簧垫圈 Single coil spring lock washers--Normal type
54 GB/T 94.1-1987 弹性垫圈技术条件 弹簧垫圈 Specifications for spring washers--Single coil spring lock washers
55 GB/T 94.2-1987 弹性垫圈技术条件 齿形、锯齿锁紧垫圈 Specifications for spring washers--Toothed lock and serrated lock washers
56 GB/T 94.3-1987 弹性垫圈技术条件 鞍形、波形弹性垫圈 Specifications for spring washers--Curved and wave spring washers
57 GB/T 95-1985 平垫圈-C级 Plain washers--Product grade C
58 GB/T 272-1993 滚动轴承 代号方法 Rolling bearing--Identification code
59 GB/T 273.1-1987 滚动轴承 圆锥滚子轴承 外形尺寸方案 Rolling bearings Tapered roller bearings--Boundary dimensions
60 GB/T 273.3-1988 滚动轴承 向心轴承 外形尺寸方案 Rolling bearings Radial bearings-Boundary dimensions
61 GB/T 274-1991 滚动轴承 装配倒角极限 Rolling bearing chamfer dimension limits
62 GB/T 275-1993 滚动轴承与轴和外壳的配合 Shaft and housing fits for rolling bearings
63 GB/T 276-1994 滚动轴承 深沟球轴承 外形尺寸 Rolling bearings--Deep groove ball bearings--Boundary dimensions
64 GB/T 280-1964 带毡封圈的单列向心球轴承 结构型式和基本尺寸 Rolling bearings--Single-row radial ball bearings withfelt seals--Types and basic dimensions
65 GB/T 281-1994 滚动轴承 调心球轴承 外形尺寸 Rolling bearings--Self-aligning ball bearings--Boundary dimensions
66 GB/T 283-1994 滚动轴承 圆柱滚子轴承 外形尺寸 Rolling bearings--Cylindrical roller bearings-Boundary dimensions
67 GB/T 285-1994 滚动轴承 双列圆柱滚子轴承 外形尺寸 Rolling bearings--Double row cylindrical roller bearings-Boundary dimensions
68 GB/T 286-1964 双列向心球面滚子轴承 结构型式和基本尺寸 Rolling bearings--Double -row radial spherical roller bearings--Types and basic dimensions
69 GB/T 288-1994 滚动轴承 调心滚子轴承 外形尺寸 Rolling bearings--Self-aligning roller bearings-Boundary dimensions
70 GB/T 289-1964 滚针轴承 结构型式和基本尺寸 Needle roller bearings--Types and basic dimensions
71 GB/T 291-1964 螺旋滚子轴承 结构型式和基本尺寸 Rolling bearings with helically wound cylindrical rollers--Types and basic dimensions
72 GB/T 292-1994 滚动轴承 角接触球轴承 外形尺寸 Rolling bearings--Angular contact ball bearings--Boundary dimensions
73 GB/T 294-1994 滚动轴承 三点和四点接触球轴承 外形尺寸 Rolling bearings--Three point and four point contact ball bearings--Boundary dimensions
74 GB/T 296-1994 滚动轴承 双列角接触球轴承 外形尺寸 Rolling bearings--Double row angular contact ball bearings--Boundary dimensions
75 GB/T 297-1994 滚动轴承 圆锥滚子轴承 外形尺寸 Rolling bearings--Tapered roller bearings--Boundary dimensions
76 GB/T 299-1995 滚动轴承 双列圆锥滚子轴承 外形尺寸 Rolling bearings--Metric double row tapered roller bearings--Boundary dimensions
77 GB/T 300-1995 滚动轴承 四列圆锥滚子轴承外形尺寸 Rolling bearings--Four row tapered roller bearings--Boundary dimensions
78 GB/T 301-1995 滚动轴承 推力球轴承 外形尺寸 Rolling bearings--Thrust ball bearings--Boundary dimensions
79 GB/T 304.1-1988 关节轴承 分类 Spherical plain bearings Classification
80 GB/T 304.2-1988 关节轴承 代号方法 Spherical plain bearings Identification code
81 GB/T 304.3-1990 关节轴承 配合 Spherical plain bearings-Fits
82 GB/T 304.9-1981 向心关节轴承 技术条件 Spherical plain radial bearings, joint type--Technical requirements
83 GB/T 304.10-1989 关节轴承公差 Spherical plain bearings-Tolerances
84 GB/T 307.1-1994 滚动轴承 向心轴承 公差 Rolling bearings--Radial bearings--Tolerances
85 GB/T 307.2-1995 滚动轴承 测量和检验的原则及方法 Rolling bearings--Measuring and gauging principles and methods
86 GB/T 307.3-1996 滚动轴承 通用技术规则 Rolling bearings--General technical regulations
87 GB/T 307.4-1994 滚动轴承 推力球轴承 公差 Rolling bearings--Thrust ball bearings--Tolerances
88 GB/T 308-1989 滚动轴承 钢球 Rolling bearings-Steel balls
89 GB/T 309-1984 滚动轴承 滚针 Rolling bearings--Needle rollers
90 GB/T 794-1993 加强半圆头方颈螺栓 Strengthened cap head square neck bolts
91 GB/T 798-1988 活节螺栓 Eye bolts
92 GB/T 799-1988 地脚螺栓 Eyelet bolts
93 GB/T 800-1988 沉头双榫螺栓 Flat countersunk double nib bolts
94 GB/T 802-1988 组合式盖形螺母 Acorn nuts
95 GB/T 804-1988 球面六角螺母 Hexagon nuts with raised face
96 GB/T 805-1988 扣紧螺母 Tight nuts
97 GB/T 806-1988 滚花高螺母 Knurled nut with collar
98 GB/T 807-1988 滚花薄螺母 Knurled nuts
99 GB/T 808-1988 小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread
100 GB/T 809-1988 嵌装圆螺母 Insert round nuts

101 GB/T 810-1988 小圆螺母 Small round nuts
102 GB/T 812-1988 圆螺母 Round nuts
103 GB/T 815-1988 端面带孔圆螺母 Round nuts with drilled holes in one face
104 GB/T 816-1988 侧面带孔圆螺母 Round nuts with set pin holes in side
105 GB/T 817-1988 带槽圆螺母 Slotted round nuts
106 GB/T 818-1985 十字槽盘头螺钉 Cross recessed pan head screws
107 GB/T 819-1985 十字槽沉头螺钉 Cross recessed countersunk head screws
108 GB/T 820-1985 十字槽半沉头螺钉 Cross recessed raised countersunk head screws
109 GB/T 821-1988 方头倒角端紧定螺钉 Square set screws with chamfered end
110 GB/T 822-1988 十字槽圆柱头螺钉 Cross recessed cheese head serews
111 GB/T 823-1988 十字槽小盘头螺钉 Cross recessed small pan head screws
112 GB/T 824-1976 圆柱头内花键螺钉 Screws,fluted socket head
113 GB/T 825-1988 吊环螺钉 Eyebolts
114 GB/T 827-1986 标牌铆钉 Rivets for name plate
115 GB/T 828-1988 开槽盘头定位螺钉 Slotted pan head set setscrews with dog point
116 GB/T 829-1988 开槽圆柱端定位螺钉 Slotted setscrews with dog point
117 GB/T 830-1988 开槽圆柱头轴位螺钉 Slotted cheese head screws with shoulder
118 GB/T 831-1988 开槽无头轴位螺钉 Slotted shoulder screws
119 GB/T 832-1988 开槽带孔球面圆柱头螺钉 Slotted capstan screws
120 GB/T 833-1988 开槽大圆柱头螺钉 Slotted large cheese head screws
121 GB/T 834-1988 滚花高头螺钉 Knurled thumb screws
122 GB/T 835-1988 滚花平头螺钉 Knurled screws
123 GB/T 836-1988 滚花小头螺钉 Knurled screws with small head
124 GB/T 837-1988 开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank
125 GB/T 838-1988 六角头不脱出螺钉 Hexagon screws with waisted shank
126 GB/T 839-1988 滚花头不脱出螺钉 Knurled thumb screws with waisted shank
127 GB/T 840-1988 塑料滚花头螺钉 Plastic diamond knurlhead screws
128 GB/T 845-1985 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
129 GB/T 846-1985 十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws
130 GB/T 847-1985 十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws
131 GB/T 848-1985 小垫圈--A级 Plain washers--Small series--Product grade A
132 GB/T 849-1988 球面垫圈 Weshers with ball face
133 GB/T 850-1988 锥面垫圈 Washers with cone face
134 GB/T 851-1988 开口垫圈 Washers with split
135 GB/T 852-1988 工字钢用方斜垫圈 Square taper washers for I section
136 GB/T 853-1988 槽钢用方斜垫圈 Square taper washers for slot section
137 GB/T 854-1988 单耳止动垫圈 Tab washers with long tab
138 GB/T 855-1988 双耳止动垫圈 Tab washers with long tab and wing
139 GB/T 856-1988 外舌止动垫圈 External tab washers
140 GB/T 858-1988 圆螺母用止动垫圈 Tab washers for round nut
141 GB/T 859-1987 轻型弹簧垫圈 Single coil spring lock washers,Light type
142 GB/T 860-1987 鞍形弹性垫圈 Curved spring washers
143 GB/T 861.1-1987 内齿锁紧垫圈 Lock washers internal teeth
144 GB/T 861.2-1987 内锯齿锁紧垫圈 Serrated lock washers internal teeth
145 GB/T 862.1-1987 外齿锁紧垫圈 Lock washers external teeth
146 GB/T 862.2-1987 外锯齿锁紧垫圈 Serrated lock washers external teeth
147 GB/T 863.1-1986 半圆头铆钉 (粗制) Round head rivets--Black
148 GB/T 863.2-1986 小半圆头铆钉 (粗制) Round head rivets with small head--Black
149 GB/T 864-1986 平锥头铆钉 (粗制) Cone head rivets--Black
150 GB/T 865-1986 沉头铆钉 (粗制) Countersunk head rivets-Black